Cisco Systems v1.0 Manual De Usuario
98 - 165 IP Telephony v1.0 Lab 5.1.6
Copyright
© 2005, Cisco Systems, Inc.
Lab 5.1.6 Customize the IP Phone Display
Objective
• Customize the IP Phone Display
Equipment Requirements
• Cisco CallManager Express (CME) capable router
• Inline power capable switch or non-inline power switch with power injectors
• Workstation with an Ethernet 10/100 NIC installed
• Two Cisco IP phones
• IP Telephony Table 2
• Inline power capable switch or non-inline power switch with power injectors
• Workstation with an Ethernet 10/100 NIC installed
• Two Cisco IP phones
• IP Telephony Table 2
This lab relies on labs 2.1.1, 2.1.2, 3.1.1, 5.1.1, and 5.1.3 being successfully completed and loaded.
In this lab the ACME.com Company wishes to customize the IP phones with the Direct Inward Dial
(DID) number of the phone, the company name on the display, and a label on the line. Configure the
following with IOS commands or by using the GUI.