Cisco Systems 7841 Manual De Usuario

Notes

Support
status

Configurable softkeys
in the Softkey
Template
configuration

Feature

Configure Transfer (Direct Transfer policy) in
the Product Specific Configuration Layout
section in Phone Configuration.

This feature is not supported as a soft key or a
programmable line key.

Yes

Direct Transfer
(DirTrfr)

Transfer

Video Mode
Command (VidMode)

Video Mode
Command

Cisco Unified Communications Manager allows you to configure any softkey in a softkey template, but
unsupported softkeys do not display on the phone.

Procedure

Step 1

In Cisco Unified Communications Manager, select Device > Device Settings > Softkey Template.

Step 2

Locate the template that you want to change.

Step 3

Select Configure Softkey Layout from the Related Links list and click Go.

Step 4

Configure the softkey positions.

Step 5

Select Save to save the layout, template, and modification

Step 6

Select Apply Config to apply the template to the phones.

Set Minimum Ring Volume

The minimum ring volume is set to 0 (silent) for each phone by default.

Procedure

Step 1

In Cisco Unified Communications Manager Administration, choose Device > Phone.

Step 2

Find a phone from the list of phones and click the link.

Step 3

Navigate to Minimum Ring Volume and choose a value between 0 and 14.

Step 4

Click Save.

Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0

(SIP)

134

Set Minimum Ring Volume