Spectralink 8664 Manual De Usuario

Inter-Tel

®

 Model 8664/8665/8668 User Guide

In addition to the various feature buttons, your endpoint contains a display that shows
information about status, modes, call information, and available features. When the
endpoint is in the active mode, pressing 

, 

or 

 will bring up options on

the display. To access an option, press the number on your dialpad that corresponds to
the number on the display. While the four-line menu display is showing, all button
presses relate to the menu options only. To make a call, you must return to the two-
line display.
The 

 button allows you to toggle between the two- and four-line displays. For

example, the illustration below on the left shows what the two-line display looks like
when you are on an active IC call to Jane Jones. When you press 

, the display

changes from the two-line informational display to the four-line menu option display.
To put your call to Jane on HOLD press 

 

on your dialpad.

Because the display can only support 15 characters, you may see a few abbreviations.
The most commonly used abbreviations are provided in the table below.

The backlight comes on when any button is pressed or when there is an incom-

ing call. This light turns off after 10 seconds if another button is not pressed within that
period.

ACCT CODE

Account Code

CNF

Conference

DEST

Destination

DIR

Directory

DND

Do-Not-Disturb

EXT

Extension

MSG

Message

RCL

Recall

STN SPD

Station Speed Dial

SYS SPD

System Speed Dial

TFR

Transfer

TG

Trunk Group (a group of outside lines)

TRNK

Trunk (an outside line)

Two-Line Display

Four-Line Display