Spectralink 8664 Manual De Usuario

Inter-Tel

®

 Model 8664/8665/8668 User Guide

You can place calls on hold in one of two ways: individual or system. 
 • Individual Hold places the call on hold at one endpoint. It can then be directly

picked up at that endpoint or it can be picked up at another endpoint using the
Call Pickup (Reverse Transfer) feature (see 

 • System Hold places the call on hold in the system. You can then pick up the call

at any endpoint that has a flashing button for the call, including the endpoint that
placed it on hold. 

You cannot place intercom calls on system hold.

1.

Press 

until the 

 softkey is available.

2. 

Press the 

 softkey.

 To return to the caller: Press the 

softkey again

When you place a call on hold, the flashing line number on the two-line display

indicates which line is holding. If you place a call on hold and return the endpoint to idle
mode, the display does not indicate that a call is holding, however, the holding call will
recall your endpoint after the recall timer has expired. The default recall timer is set to
60 seconds.

1.

EITHER, Press 

- 

.

 

OR, Press 

until the 

 softkey is available and then press the 

softkey.

2. 

Dial the System Hold feature code, 

 

 

.

3. 

Hang up or place another call.

1.

Press 

2. 

Press the flashing 

line number (

).