Panasonic KX-TG6502 Manual De Usuario

Descargar
Página de 108
Useful Info
rmation
Answering
 System
Preparatio
n
93
If the Following Appear on Your Display...
T
e
lephone System
For assistance, please call: 1-800-211-PANA(7262)
Display message
Cause & Remedy
Phone book full
• When you tried to store an item in the phone book, 
the phone book memory was full. Press [OFF] to exit 
programming mode. To erase other items from the 
phone book, see page 51.
---Incomplete---
Tom Jones
098-765-4321
Phone book full
(The name/number is 
an example.)
• When the displayed item was sent to the destination 
handset, the phone book memory was full and 
copying stopped. If you tried to send all of the items, 
the item displayed with “Incomplete” and items after 
it have not been copied to the destination handset. 
Press [OFF] to exit. To erase items from the 
destination handset phone book, see page 51. You 
can copy all of the items again or copy the items 
which have not been copied one by one (p. 52, 53).
---Incomplete---
Tom Jones
555-765-4321
(The name/number is 
an example.)
• The destination handset is out of area.
• The destination handset user may have pressed [
C
] 
or [s].
     Phone book       
No items stored
• Your phone book is empty. No items cannot be 
copied to the destination unit.
Denied
• The Room Monitor feature is turned off on the 
destination handset or base unit and cannot be 
monitored (p. 63).
• The called handset was on the base unit. The 
handset must be off the base unit to be monitored.
Invalid.                     
Please register 
to the base unit
• The handset you tried to call has not been registered 
to the base unit. Register the handset (p. 91, steps 5 
and 6).
         Error!!                   
4 handsets have 
already been 
registered.
• 4 handsets have already been registered to the base 
unit. To cancel a handset’s registration, see page 90
• You may have registered one of your handsets to 
another base unit without deleting its registration to 
this base unit. Erase the handset’s registration from 
the base unit. 
(1) Press and hold [LOCATOR/INTERCOM/
TRANSFER]
 for 3 seconds, and (2) Press and hold 
the handset number [1]
 ( ) to 
[4]
  ( )
 that you do 
not want for 5 seconds. A long beep sounds, then the 
handset number is erased from the base unit 
memory.
TG6500.book  Page 93  Friday, June 25, 2004  6:56 PM