Panasonic KX-TG6502 Manual De Usuario

The Answering System is on, 
but incoming messages are not 
recorded.

• The recording time is set to “Greeting only”. Select 

“1 minute”, “2 minutes” or “3 minutes” (p. 30).

• Memory is full. Erase unnecessary messages (p. 77).
• The Answering System is not turned on for the 

line you wish to record messages from. Select 
the desired line or both lines by pressing [LINE 
SELECT] repeatedly, then turn the Answering 
System on again (p. 71).

“

” flashes and the 

ANSWER ON indicator flashes 
rapidly. No new messages are 
recorded.

• Memory is full. Erase unnecessary messages 

You cannot operate the 
Answering System from the 
base unit or the handset.

• If more than 1 other user is using the handset 

and/or base unit, you may not be able to 
operate the Answering System. Try again later.

• If another user is listening to messages or the 

Answering System is handling a call, you cannot 
operate the Answering System. Try again later.

You cannot operate the 
Answering System from a touch 
tone phone.

• Make sure you entered the correct remote 

code (p. 81).

• The Answering System may not respond if the 

tones are too short to activate the unit. Press 
each button firmly.

• The Answering System is off. Turn it on (p. 71).

When you play back messages 
or turn on the Answering 
System, the base unit and 
handset announce the wrong 
day and time.

• The date and time may be set incorrectly. Set 

the date and time again (p. 20).

Caller ID information is not 
displayed during message 
playback (p. 76).

• Caller ID information will not be displayed

— if a message is recorded by using [MEMO] 

(p. 78), or

— if a call is transferred to the Answering System 

and the caller leaves a message (p. 79).

Although you tried to erase all 
messages, all messages are 
not erased.

• If you pressed a button to start another operation 

before you hear “No messages”, erasing is 
stopped. Erase messages again (p. 77, 78).

The NEW MESSAGE indicator 
still flashes even if you have 
listened to all new messages.

• The other line has new messages. Select that 

line by pressing [LINE SELECT], then play 
back the new messages (p. 73).

• If you selected lines to play back messages, 

memo messages will not be played. Play back 
messages without selecting lines first (p. 73).

TG6500.book  Page 97  Friday, June 25, 2004  6:56 PM