Panasonic KX-TES824 Manual De Usuario
3.2 Connection
Installation Manual
77
3.2.2
Starting KX-TE Maintenance Console for the first time
When you start the KX-TE Maintenance Console with the Installer Level Programmer Code and
connect to the PBX for the first time after initialisation (with factory default setting), Quick Setup will
launch automatically. During Quick Setup, you will setup:
connect to the PBX for the first time after initialisation (with factory default setting), Quick Setup will
launch automatically. During Quick Setup, you will setup:
•
The country code of the PBX. (This setting is only available when the model code is set to
"CE" or "NE", and the country codes of the PBX and Maintenance Console do not match.)
"CE" or "NE", and the country codes of the PBX and Maintenance Console do not match.)
•
The date and time. The PBX uses the date and time set to the PC.
•
The System Password.
•
The operator extension number.
•
Automatic Configuration for CO Line Type (DTMF/Pulse).
•
The feature numbers for Operator Call and Automatic Line Access.
•
Extension numbers and names.
•
The Numbering Plan type.
•
Ringing assignment for each outside (CO) line (either all extensions, or a specific extension).
Note
The screenshots shown here are for reference only, and may differ from the screens displayed
on your PC.
on your PC.
Note
Software features, design, and system requirements are subject to change.
1. Start the KX-TE Maintenance Console software
from the start menu. (Start
→ Programs → KX-TE
Maintenance Console)
2. Type the Installer Level Programmer Code that was
set during the KX-TE Maintenance Console
installation.
installation.
3.
a.
Click the check box to connect to the PBX.
Options will appear as shown here, on the left.
Options will appear as shown here, on the left.
b.
Type the System Password. (default: 1234)
c.
Select the method of connection.
d.
Click OK to log in.
4. Quick Setup starts. Follow the on-screen
instructions and assign the items as prompted.