Panasonic KX-TG2503ALF Manual De Usuario

When the RECHARGE indicator flashes or the 
unit beeps intermittently, place the handset on 
the base unit to recharge the battery for 6 hours.

•If you DO NOT recharge the handset battery 

for more than 15 minutes, the RECHARGE 
indicator will continue to flash.

Note:
While using the handset:
— If you are near a microwave oven which is being used, noise may

be heard at the receiver. Move away from the microwave oven
and closer to the base unit.

— If more than one cordless phone is being used and your handset

is near another cordless phone’s base unit, noise may be heard.
Move away from the other cordless phone’s base unit and closer
to your base unit.

Calls are transmitted between the base unit and the handset using wireless
radio waves. For maximum distance and noise free operation, the
recommended base unit location is:

RECHARGE 
Indicator

In a HIGH and CENTRAL location 
with no obstructions such as walls.

Away from electrical appliances 
such as a TV, personal computer 
or another cordless phone.

Raise 
the antennas.

*Within about 10 feet (3 m)
•Battery life may vary depending on usage conditions and ambient

temperature.

•Clean the handset and the base unit charge contacts with a soft dry

cloth once a month. Clean more often if the unit is subject to grease,
dust or high humidity. Otherwise, the battery may not charge properly.

•If the battery is fully charged, you do not have to place the handset on the

base unit until the RECHARGE indicator flashes. This will maximise the
battery life. 

•The battery cannot be overcharged.

After your Panasonic battery is fully charged:

If the RECHARGE indicator flashes after being fully charged, replace the
battery with a new Panasonic P-P510 (N4HKGMB00001) battery.

1

Carefully insert a flat
metal object in the slot,
and push forward to
release the lock. Remove
the cover.

2

Replace the battery.
Place the battery leads
inside the groove,
otherwise the leads may
be damaged when closing
the cover.

3

Close the cover. 
Make sure to charge the
new battery for 6 hours.

Push 
forward.

1

2

This unit will not function during a power failure. To connect a standard
telephone on the same line, use a telephone double adaptor (for Australia)
or a T-adaptor (for New Zealand).

Telephone 
Line Cord

Standard Telephone

To 
Socket

(Optional)

Telephone 
Double Adaptor

Standard 
Telephone

Telephone Line Cord

T-Adaptor 
(Optional)

To Single-Line 
Telephone Jack

Up to 11 days

While not in use (Standby)

Up to 4.5 hours

While in use 

(TALK)

away from the base unit

near the base unit*

Up to 3.5 hours