Panasonic KX-TG2503ALF Manual De Usuario

For New Zealand Users Only
The grant of a Telepermit for any item of terminal equipment indicates
only that Telecom has accepted that the item complies with minimum
conditions for connection to its network. It indicates no endorsement of
the product by Telecom, nor does it provide any sort of warranty.
Above all, it provides no assurance that any item will work correctly in
all respects with another item of Telepermitted equipment of a different
make or model, nor does it imply that any product is compatible with all
of Telecom’s network services.

WARNING NOTICE:
No “111” or other calls can be made from this device during a mains
power failure.
This equipment shall not be set to make automatic calls to the Telecom
“111” Emergency Service.
•We recommend that a standard phone which can be used in the case

of a power failure be connected to the telephone line at all times.

Take special care to follow the safety suggestions listed below.

Safety
1) The unit should be connected to a power supply only of the type

described in the operating instructions or as marked on the unit.

2) When left unused for a long period of time, the base unit should be

unplugged from the household AC outlet.

3) To minimize the possibility of lightning damage when you know that a

thunderstorm is coming, we recommend that you:
a) Unplug the telephone line cord from the phone jack.
b) Unplug the power supply cord from the AC power outlet.

Installations
Environment
1) Do not use this unit near liquids—for example, near a bathtub,

washbowl, sink, etc. Damp environments should also be avoided.

2) The unit should be kept away from heat sources such as radiators,

kitchen range, etc. It also should not be placed in rooms where the
temperature is less than 5°C or greater than 40°C.

3) The AC adaptor is used as the main disconnect device, ensure that the

AC outlet is located/installed near the unit and is easily accessible.

Placement
1) Do not place heavy objects on top of this unit.
2) Care should be taken so that objects do not fall onto, and liquids are not

spilled into, the unit. Do not subject this unit to excessive smoke, dust,
mechanical vibration or shock.

3) Place the unit on a flat surface.

For best performance
1) If noise prevents the conversation from being understood at the handset,

approach the base unit to lessen the noise.

2) The handset should be used at the HIGH volume setting when the

reception audio is difficult to hear.

3) The handset should be fully recharged on the base unit when the

RECHARGE indicator flashes.

4) The handset antenna should not be touched during use because of its

high sensitivity.

5) The maximum calling distance may be shortened when the unit is used

in the following places: Near obstacles such as hills, tunnels,
undergrounds, near metal objects such as wire fences, etc.

WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE BASE
UNIT TO LIQUID OR ANY TYPE OF MOISTURE. ONLY THE HANDSET
IS SHOCK AND SPLASH RESISTANT.

When a failure occurs which results in the internal parts becoming
accessible, disconnect AC adaptor immediately and return this unit to the
place of purchase or service centre. 

If there is any trouble, disconnect the unit from the telephone line and
connect a known working phone. If the known working phone operates
properly, do not reconnect the unit to the telephone line until the fault has
been repaired. If the known working phone does not operate properly,
consult your telephone company.

This equipment has been tested and found to comply with AS/NZS 3548:
1995 limits for electromagnetic interference. Any modifications to any part
of the system or to any peripherals may void the EMC compliance of the
system or the peripherals.

This equipment will be inoperable when mains power fails.

The earcap on the handset is magnetised and may retain metallic objects.

Operating near 2.4GHz electrical appliances may cause interference. Move
away from the electrical appliances and/or press the CH (Channel) button.

Medical
Consult the manufacturer of any personal medical devices, such as
pacemakers, to determine if they are adequately shielded from external RF
(radio frequency) energy. (The unit operates in the frequency range of
2401MHz to 2462MHz, and the power output level can range from 0.001
watts to 0.20 watts.) Do not use the unit in health care facilities if any
regulations posted in the area instruct you not to do so. Hospitals or health
care facilities may be using equipment that could be sensitive to external
RF (radio frequency) energy.

Although the handset is designed to be shock resistant, do not throw or
step on the handset.

The handset is designed to be splash resistant.
You can use the handset with wet hands.

CAUTION:
•Do not immerse in water or leave under running water.

•Keep the handset away from salt water or liquids containing chemicals.

•Avoid exposure to prolonged high humidity.

•Since water in the headset jack may cause damage, close the headset

jack cover when the optional headset is not in use. When the optional
headset is connected, do not use the handset with wet hands.

•If the handset is wet, wipe with a soft dry cloth.

•The base unit is not designed to be splash resistant. Do not place the wet

handset on the base unit.