Panasonic KX-NT700 Manual De Usuario
Using a Computer
By connecting the unit to a computer, you can use the
unit’s microphones and speaker for calls made or
received with the computer using your preferred IP
phone software.
unit’s microphones and speaker for calls made or
received with the computer using your preferred IP
phone software.
Connecting a Computer
Connect the included PC Cable to the [AUDIO IN/
OUT] jack of the unit (A), and to the microphone jack
(red plug; B) and headphone jack (green plug; C) of
the computer.
OUT] jack of the unit (A), and to the microphone jack
(red plug; B) and headphone jack (green plug; C) of
the computer.
A
C
B
Note
•
The microphone and speaker of the computer
cannot be used while the computer is
connected to the unit.
cannot be used while the computer is
connected to the unit.
Line Selection (IP + PC)
1.
Press [MENU].
2.
Press
LINE
.
3.
Select "IP + PC".
•
When "Line Selection" is set to "IP + PC",
TEL calls cannot be made or received.
TEL calls cannot be made or received.
4.
Press
SAVE
.
5.
Press [MENU].
Using a Computer
1.
Confirm that "PC" is shown in the upper-right corner
of the display.
of the display.
•
You can change the selected line by pressing
the center function button ([F2]).
the center function button ([F2]).
The IP line is selected.
The PC line is selected.
[F2]
[F2]
•
If you cannot select "PC", change the "Line
Selection" setting to "IP + PC" (explained
on this page).
Selection" setting to "IP + PC" (explained
on this page).
2.
Press [
] to begin using the unit’s microphones
and speaker.
•
Press [
] again to turn off the microphones
and speaker.
3.
Use the desired computer software to make or
answer a call.
answer a call.
4.
Use the computer to end the call.
5.
Turn off the unit’s microphones and speaker by
pressing [
pressing [
].
Note
•
Leave at least 50 cm (about 20 in.) of space
between the unit and the computer.
between the unit and the computer.
42
Operating Instructions
Document Version 2008/10
Using a Portable Station (PS) or Computer