Cisco Systems Linksys PAP2 Manual De Usuario
string supports one level of macro substitution, with the same variables as for the Upgrade_Rule
above. An empty string does not generate a syslog message.
above. An empty string does not generate a syslog message.
Parameter Name
Description
Type
Default
Upgrade Enable
Master enable for firmware upgrade
operations
operations
Bool Yes
Upgrade Error
Retry Delay
Retry Delay
Retry interval following upgrade failure
Time0
3600
Upgrade Rule
Upgrade script.
UpgradeScript empty
Log Upgrade
Request Msg
Request Msg
Syslog message generated when
attempting an upgrade
attempting an upgrade
UpgradeMsg See
provisioning
discussion
section
discussion
section
Log Upgrade
Success Msg
Success Msg
Syslog message generated after a
successful upgrade
successful upgrade
UpgradeMsg See
provisioning
discussion
section
discussion
section
Log Upgrade
Failure Msg
Failure Msg
Syslog message generated after a failed
upgrade
upgrade
UpgradeMsg See
provisioning
discussion
section
discussion
section
Note: In a customized PHONE ADAPTER, the upgrade rule would point to a service provider’s
server.
4.2.2.
Provisioning Server Redundancy
The Provisioning Server (PS) may be specified as an IP address or a FQDN. PS redundancy is not
available in the former case. For the latter, PHONE ADAPTER shall attempt to resolve the IP address
of the PS via DNS SRV, then DNS A Record. In either case, the DNS server may return a number of
IP addresses with priority (priority can be indicated in the case of SRV record; for A records, all IP
addresses have the same priority). The PHONE ADAPTER then contacts the IP address with the
highest priority. If that fails, the PHONE ADAPTER shall contact the next available IP address. The
PHONE ADAPTER shall continue the process until one of the PS responds. If all PS fail to respond,
the PHONE ADAPTER shall log an error to the Syslog server.
available in the former case. For the latter, PHONE ADAPTER shall attempt to resolve the IP address
of the PS via DNS SRV, then DNS A Record. In either case, the DNS server may return a number of
IP addresses with priority (priority can be indicated in the case of SRV record; for A records, all IP
addresses have the same priority). The PHONE ADAPTER then contacts the IP address with the
highest priority. If that fails, the PHONE ADAPTER shall contact the next available IP address. The
PHONE ADAPTER shall continue the process until one of the PS responds. If all PS fail to respond,
the PHONE ADAPTER shall log an error to the Syslog server.
4.2.3.
Configuring the Web Server and IVR
System Configuration
Parameter Name
Description
Type
Default
Restricted Access
Domains
Domains
This feature is used when implementing software
customization.
customization.
Str127
Enable Web Server
Enable/disable web server of PHONE ADAPTER
This feature should only be used on firmware version 1.0.9 or later.
Bool Yes
Web Server Port
TCP port through which the PHONE ADAPTER web
server will communicate
server will communicate
Uns8 80
Enable Web Admin
Access
Access
Enable/disable Admin pages of web server of PHONE
ADAPTER
ADAPTER
Bool Yes
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
46