Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco Systems
  4. Linksys PAP2
  5. Manual De Usuario

Cisco Systems Linksys PAP2 Manual De Usuario

Descargar
Página de 117
 
 
 
 
Protect IVR Factory 
Reset 
 Bool 
No 
Admin Password 
The password for administrator 
Str63 
User Password 
The password for User 
Str63 
 
 
4.3. 
Basic Networking Configuration 
 
Configuration parameters in this list are used for setting up basic network connectivity.  In general, 
many of these parameters are set automatically (for example, using DHCP) or are configured by the 
end user of the device.  
 
Note that the RT31P2 ignores the following parameters: DHCP, Static_IP, NetMask, and Gateway. 
Other than the DNS_Server_Order and DNS_Query_Mode, the rest these parameters also can be 
configured from the RT31P2 User GUI. 
 
Network Configuration 
Parameter Name 
Description 
Type 
Default 
DHCP Enable/Disable DHCP 
Bool 
Yes 
Host Name 
Host Name of PHONE ADAPTER 
Str31 
 
Domain 
The network domain of PHONE ADAPTER 
Str127 
 
Static IP 
Static IP address of PHONE ADAPTER, which will take 
effect if DHCP is disabled 
IP 0.0.0.0 
NetMask 
The NetMask used by PHONE ADAPTER when DHCP 
is disabled 
IP 255.255.255.
0 
Gateway 
The default gateway used by PHONE ADAPTER when 
DHCP is disabled 
IP 0.0.0.0 
Primary DNS 
DNS server used by PHONE ADAPTER in addition to 
DHCP supplied DNS servers if DHCP is enabled; when 
DHCP is disabled, this will be the primary DNS server. 
IP 0.0.0.0 
Secondary DNS 
DNS server used by PHONE ADAPTER in addition to 
DHCP supplied DNS servers if DHCP is enabled; when 
DHCP is disabled, this will be the secondary DNS 
server. 
IP 0.0.0.0 
DNS Query Mode 
Do parallel or sequential DNS Query 
Choice 
Parallel 
Syslog Server 
Specify the Syslog server name and port. This feature 
specifies the server for logging PHONE ADAPTER 
system information and critical events. 
FQDN  
Debug Server 
The debug server name and port.  This feature 
specifies the server for logging PHONE ADAPTER 
debug information. The level of detailed output 
depends on the debug level parameter setting. 
FQDN  
Debug Level 
The higher the debug level, the more debug 
information will be generated.  Zero (0) means no 
debug information will be generated. 
Choice 0 
Primary NTP 
Server 
IP address or name of primary NTP server. 
Str127 
or IP 
 
Secondary NTP 
Server 
IP address or name of secondary NTP server 
Str127 
or IP 
 
 
Notes:   
 
© 2004 Linksys Proprietary (See Copyright Notice on Page 2) 
 
 
 
47