3com 825 Manual De Usuario

EPSON Stylus Photo 825

4 -

 EPSON Stylus Photo 825 1

1/02

❏ See page 3 for EPSON papers that can be used with this 

printer. 

❏ Except for envelopes, load paper short edge first, even when 

printing landscape-oriented pictures. Load envelopes flap 
edge first with the flap side down. 

❏ Always handle sheets by the edges, and don’t touch the 

printable surface.

❏ Be sure to load the printable (whiter) side of the media face 

up in the sheet feeder. 

❏ Do not load paper higher than the arrow mark on the left 

edge guide. (Some papers should be loaded just one sheet at 
a time.) 

❏ In addition to the 

Media

 

Type

 (or 

Paper Type

) setting, 

remember to select the correct 

Paper

 

Size

 for your media.

❏ If the special media has protective sheets between each sheet 

of media, be sure to remove the protective sheets before 
printing.

❏ Some special media have a cut corner that you need to 

position in the upper right when loading.

Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the 
quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large 
jobs.

Poor quality paper may reduce print quality and cause paper jams and other problems. If you encounter problems, switch to a higher 
grade of paper.

Do not load curled or folded paper.

Use papers under these conditions:

Temperature: 59 to 77 °F (15 to 25 °C)
Humidity:

40 to 60% RH

Store printouts on Photo Quality Glossy Film and Self Adhesive Sheets under these conditions:

Temperature: 59 to 86 °F (15 to 30 °C)
Humidity:

20 to 60% RH

A:

The minimum top margin is 0.12 inch (3.0 mm).
When loading multiple sheets of EPSON Photo Quality Glossy 
Film, the minimum top margin is 1.2 inches (30.0 mm).

B-L:  The minimum left margin is 0.12 inch (3.0 mm).

B-R: The minimum right margin is 0.12 inch (3.0 mm) for all papers 

except DL envelopes (0.28 inch [7.0 mm]) and No. 10 envelopes 
(1.10 inches [28.0 mm]).

C:

The minimum bottom margin is 0.55 inch (14.0 mm).

*

You can extend the minimum bottom margin to 0.12 inch (3.0 mm) 
by selecting Maximum as the Printable Area setting. However, 
print quality may decline in the expanded area.

**

When printing with the No Margins setting, print quality may 
decline in the top and bottom areas of the printout and some of 
the image will be cropped.

A

B-L

B-R

C

A

B-L

B-R

C

single sheets/index cards

envelopes

** no margins

(4 

× 6, 5 × 7, 8 × 10,

and

 letter-size only)