3com 825 Manual De Usuario

EPSON Stylus Photo 825

6 -

 EPSON Stylus Photo 825 1

1/02

You can select one or more photos for printing:
❏ If you select one photo, you can print one or more copies of 

it on a page, depending on your selected layout. With the 
copies option, you can print multiple pages of your selected 
layout.

❏ If you select a set of photos, you can print them as a group 

using a variety of layouts. If you’ve selected more photos 
than can fit on a page, the printer automatically prints 
additional pages as needed, using the selected layout. 

Make sure the type of paper you want to use is loaded in the 
printer, then follow these steps:

1. Select your Print Mode (

All

, 

One

, or 

Set

), depending on 

which photos you want to print. 

2. Select the appropriate Paper Type and Paper Size settings. 

See page 3 to choose the correct Paper Type setting. 

3. In the Page Layout menu, select one of the options shown 

below. 

Prints one photo per sheet, borderless; fits the photo 
lengthwise on the paper.

Prints 1, 2, 3, or 4 photos per sheet, with borders 
around the edges.

Prints 20 photos per sheet. If you select a set of photos, 
the photo number and date are also printed with each 
photo. (Good for printing larger-size index prints.)

Your photos are automatically sized to fit the type of 
paper you’ve loaded.

If you’re printing on roll paper, the page layout is 
automatically selected (you can print only borderless 
photos on roll paper).

4. At the Select Photo menu, press the   button to select the 

picture you want to print. 

If you’re printing various photos, press the round 

Select 

Photo

 button when the number of the picture you want to 

print is displayed. Continue pressing this button to print 
additional copies of this photo (shown in the Copies menu). 
When done, use the   and   buttons to select additional 
photos.

If you’re printing just one photo (Print Mode is set to 

One

), 

you can use the Copies menu to select the number of pages 
you want to print. (If the Print Mode is on 

Set

, the number 

of pages is automatically determined; you cannot change 
this setting.)

5. In the PhotoEnhance menu, select 

On

 (if your camera 

supports PRINT Image Matching

™

 or to improve 

brightness and contrast) or 

Off

. 

6. Press the 

 

Print

 button. Your print job begins printing. 

When using the printer in stand-alone mode, you can make 
additional changes to your images before printing. For 
example, you can adjust the brightness or use various 
filters to make color corrections. These changes do not 
affect your original photo files, just the way they’re printed. 
For details, see the Printer Basics book. 

To cancel a print job while printing, press the Cancel 
button. 

You can run a printer self-test to determine whether a problem 
comes from the printer itself or some other source. 

1. Make sure both the printer and computer are turned off. 

Then disconnect the USB cable from the printer.

2. Make sure letter-size or larger paper is loaded in the printer.

3. Hold down the b maintenance button, then press and 

release the

 

P

power button. 

The printer prints a test page showing its ROM version 
number, black and color ink percentages remaining, and a 
nozzle check pattern. (If the pattern has gaps, you need to 
clean the print head; see page 8.)

❏ If the test page prints, the problem probably lies in your 

memory card, software settings, interface cable, or 
computer. Your software may not be installed correctly.

❏ If the test page doesn’t print, you may have a problem 

with the printer. Try the suggestions in the Printer 
Basics book. If you can’t solve the problem yourself, 
contact your dealer or EPSON.

4. After examining the test page, remember to turn off the 

printer and reconnect its cable to your computer.