Motorola RMU2080D Manual De Usuario

English

The radio display shows the CTCSS/DPL code 
as follows:

To program the desired code, use the  

 and 

 buttons until you get the CTCSS/DPL code 

value you want to set up. Long press the PTT 
button to exit and save, or short press the PTT 
button to move to the next programming 
feature without saving.

PROGRAMMING SCRAMBLE 

The scramble feature makes your 
transmissions sound garbled to anyone 
listening without the same scramble code. It 
does not guarantee confidentiality, but it adds 
an extra layer of privacy. Scramble mode is by 
default set to ‘OFF’.

Once you have entered Advanced 
Configuration Mode and selected the channel 
in which you want to enable Scramble ( ), 
scroll up or down through the programming 
modes by short pressing the PTT button or 

 

(Menu) button until the radio reaches the 

Scramble Programming Mode.

The radio display shows the Scramble settings 
as follows:

The current scramble value blinks. You can 
select the desired scramble value (0,1,2 or 3) 
by pressing the 

 and 

 buttons. Long 

press the PTT button to exit and save, or short 
press the PTT button to move to the next 
programming feature without saving.

The values available for scrambling are 
dependent to the values programmed via