Motorola RMU2080D Manual De Usuario
English
41
PROGRAMMING F
E
ATURES
Tones’ selection by short pressing the PTT
button or
button or
(Menu) button.
The radio display shows the Programming Call
Tone’ as follows:
Tone’ as follows:
The radio display blinks the current call tone
setting. You can select the desired call tone
value (0,1,2 or 3) by pressing the
setting. You can select the desired call tone
value (0,1,2 or 3) by pressing the
and
buttons. Each time you select a different value,
your radio sounds the selected call tone
(except for value ‘0’).
your radio sounds the selected call tone
(except for value ‘0’).
Once you have selected the desired call tone,
long press the PTT button to exit and save, or
short press the PTT button to move to the next
programming feature without saving.
long press the PTT button to exit and save, or
short press the PTT button to move to the next
programming feature without saving.
Note:
The values available for Call Tones settings
are dependent on the values programmed
are dependent on the values programmed
via the CPS. Call Tones is disabled when
the value is set to ‘0’.
the value is set to ‘0’.
PROGRAMMING MICROPHONE GAIN
LEVEL
LEVEL
To configure the Microphone Gain Level, enter
the Advanced Configuration Mode and scroll
up or down through the programming modes
by short pressing the PTT button or
the Advanced Configuration Mode and scroll
up or down through the programming modes
by short pressing the PTT button or
(Menu) button until you reach the ‘Microphone
Gain Level Programming Mode’.
Gain Level Programming Mode’.
The radio display shows the Microphone Gain
Level as follows:
Level as follows:
The radio display blinks the current Microphone
Gain Level setting. You can select the desired
Microphone Gain Level (1 = low gain, 2 =
Gain Level setting. You can select the desired
Microphone Gain Level (1 = low gain, 2 =