Manual De UsuarioTabla de contenidosPreface3Contents4Terminology71. Precautions for Safety91.1 Safety Symbols and Meanings102. Preparation212.1 Package Components222.2 Other Tool Products Required for Development222.3 Name of Each Part23(1) System Configuration23(2) Inside of the Emulation Pod242.4 When Using This Product for the First Time25(1) Making the MCU File25(2) Setting the Work Area25(3) Downloading Firmware26(4) Self-check263. Setting Up273.1 Removing and Closing the Upper Cover283.2 Each Setting293.3 Selecting Clock Supply and Replacing Oscillator Circuit Boards30(1) Clock Supply to the MCU30(2) Using the Oscillator Circuit on the Target System31(3) Changing the Internal Oscillator Circuit of the Emulation Pod32(4) Replacing Oscillator Circuit Boards333.4 Switch Settings34(1) Toggle Switches SW1 to SW5 on the M30620T3-PRT Board (MCU-dependent 1)34(2) Jumper Switches JP1 and JP2 on the M30620T3-PRT Board (MCU-dependent 1)363.5 Installing and Removing Pullup Resistors373.6 A-D Conversion Bypass Capacitors383.7 Connecting the PC470139(1) Connecting the Cable to the PC470139(2) Connecting the Cable to the Emulation Pod403.8 Connecting the Target System41(1) Connecting to a 100-pin LCC Socket42(2) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 1)43(3) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 2)44(4) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 3)454. Usage474.1 Turning On the Power48(1) Checking Connections of the Emulator System48(2) Turning On the Power48(3) LED Display When the PC4701 Starts Up Normally494.2 Downloading Firmware50(1) When It is Necessary to Download Firmware50(2) Downloading Firmware in Maintenance Mode504.3 Self-check51(1) Self-check Procedure51(2) If an Error is Detected in the Self-check515. Specifications535.1 Specifications545.2 Operation Timing in Memory Expansion and Microprocessor Modes (5 V)55(1) Separate Bus Timing55(2) Multiplex Bus Timing57(3) Timing Requirements595.3 Connection Diagram605.4 External Dimensions62(1) External Dimensions of the Emulation Pod62(2) External Dimensions of the Converter Board M30800T-PTC636. Troubleshooting656.1 Flowchart to Remedy the Troubles666.2 When the Emulator Debugger Does Not Start Up Properly67(1) When the LED Display of the PC4701 is Abnormal67(2) Program Window is Not Displayed at Debugger Startup (Target Connected)68(3) Program Window is Not Displayed at Debugger Startup (Target Not Connected)696.3 How to Request for Support697. Maintenance and Guarantee717.1 Maintenance727.2 Guarantee727.3 Repair Provisions727.4 How to Request for Repair73Tamaño: 600 KBPáginas: 76Language: EnglishManuales abiertas