Renesas M306N4T3-RPD-E マニュアル

目次

• Preface

  3
• Contents

  4
• Terminology

  7
• 1. Precautions for Safety

  9
  • 1.1 Safety Symbols and Meanings

    10
• 2. Preparation

  21
  • 2.1 Package Components

    22
  • 2.2 Other Tool Products Required for Development

    22
  • 2.3 Name of Each Part

    23
    • (1) System Configuration

      23
    • (2) Inside of the Emulation Pod

      24
  • 2.4 When Using This Product for the First Time

    25
    • (1) Making the MCU File

      25
    • (2) Setting the Work Area

      25
    • (3) Downloading Firmware

      26
    • (4) Self-check

      26
• 3. Setting Up

  27
  • 3.1 Removing and Closing the Upper Cover

    28
  • 3.2 Each Setting

    29
  • 3.3 Selecting Clock Supply and Replacing Oscillator Circuit Boards

    30
    • (1) Clock Supply to the MCU

      30
    • (2) Using the Oscillator Circuit on the Target System

      31
    • (3) Changing the Internal Oscillator Circuit of the Emulation Pod

      32
    • (4) Replacing Oscillator Circuit Boards

      33
  • 3.4 Switch Settings

    34
    • (1) Toggle Switches SW1 to SW5 on the M30620T3-PRT Board (MCU-dependent 1)

      34
    • (2) Jumper Switches JP1 and JP2 on the M30620T3-PRT Board (MCU-dependent 1)

      36
  • 3.5 Installing and Removing Pullup Resistors

    37
  • 3.6 A-D Conversion Bypass Capacitors

    38
  • 3.7 Connecting the PC4701

    39
    • (1) Connecting the Cable to the PC4701

      39
    • (2) Connecting the Cable to the Emulation Pod

      40
  • 3.8 Connecting the Target System

    41
    • (1) Connecting to a 100-pin LCC Socket

      42
    • (2) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 1)

      43
    • (3) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 2)

      44
    • (4) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 3)

      45
• 4. Usage

  47
  • 4.1 Turning On the Power

    48
    • (1) Checking Connections of the Emulator System

      48
    • (2) Turning On the Power

      48
    • (3) LED Display When the PC4701 Starts Up Normally

      49
  • 4.2 Downloading Firmware

    50
    • (1) When It is Necessary to Download Firmware

      50
    • (2) Downloading Firmware in Maintenance Mode

      50
  • 4.3 Self-check

    51
    • (1) Self-check Procedure

      51
    • (2) If an Error is Detected in the Self-check

      51
• 5. Specifications

  53
  • 5.1 Specifications

    54
  • 5.2 Operation Timing in Memory Expansion and Microprocessor Modes (5 V)

    55
    • (1) Separate Bus Timing

      55
    • (2) Multiplex Bus Timing

      57
    • (3) Timing Requirements

      59
  • 5.3 Connection Diagram

    60
  • 5.4 External Dimensions

    62
    • (1) External Dimensions of the Emulation Pod

      62
    • (2) External Dimensions of the Converter Board M30800T-PTC

      63
• 6. Troubleshooting

  65
  • 6.1 Flowchart to Remedy the Troubles

    66
  • 6.2 When the Emulator Debugger Does Not Start Up Properly

    67
    • (1) When the LED Display of the PC4701 is Abnormal

      67
    • (2) Program Window is Not Displayed at Debugger Startup (Target Connected)

      68
    • (3) Program Window is Not Displayed at Debugger Startup (Target Not Connected)

      69
  • 6.3 How to Request for Support

    69
• 7. Maintenance and Guarantee

  71
  • 7.1 Maintenance

    72
  • 7.2 Guarantee

    72
  • 7.3 Repair Provisions

    72
  • 7.4 How to Request for Repair

    73