Emerson 51-DO-03 Manuel D’Utilisation
MODEL DO-03/04
SECTION 9.0
MAINTENANCE
FIGURE 9-2. Replacement Parts
9.4 AIR BLAST SENSOR WASHER
The air blast sensor washer needs little routine maintenance. Replace the two large O-rings on the base of the
washer head and the sensor sealing O-ring if they become cut or dirty or if there is evidence of water leaking into
the washer head. The three O-rings are available as a kit (PN 24053-00).
washer head and the sensor sealing O-ring if they become cut or dirty or if there is evidence of water leaking into
the washer head. The three O-rings are available as a kit (PN 24053-00).
See Figure 9-2 for replacement parts.
Location
Part Number
Description
1
24049-00
Sensor washer head
2
note
Screw, 1/4 x 20 x 0.375 SFH
3
24054-00
O-ring kit, quantity 3 with barium lube
4
24055-00
Quick disconnect and check valve assembly
5
33866-00
Air hose, 25 ft, 1/4-inch ID
Screw size is for information only. Screw cannot be purchased from Rosemount.
53