ResMed Stellar 150 Manuel D’Utilisation

14

Ramp time is a feature that can be enabled 
by your clinician by setting a maximum ramp 
time. Designed to make the beginning of 
treatment more comfortable, ramp time is 
the period during which the pressure 
increases from a low start pressure to the 
treatment pressure. See “Setup menu: 
Options” on page 16.

If the Clinician has selected both, ie, dual, 
you can choose the program to use on the 
Treatment screen. If only a single program is 
selected, the option does not display.

You can use mask-fit to help you fit your mask properly. This feature delivers constant 
treatment pressure for a three-minute period, prior to starting treatment, during which you 
can check and adjust your mask-fit to minimise leaks. The mask-fit pressure is the set 
CPAP or EPAP pressure or 10 cm H

2

O, whichever is greater.

Put the mask on according to the mask user guide.

Hold down 

 for at least three seconds until pressure delivery starts. 

If necessary adjust the mask, mask cushion and headgear until you have a good mask fit. 
After three minutes treatment will begin. Mask-fit can be stopped at any time by pressing 

.

Notes: 
• Press   for at least three seconds during mask-fit to start the treatment immediately. 
• The mask-fitting feature is disabled when the mask type Trach is selected.

Ramp time

Program