GE 20622 Manuel D’Utilisation

12

Volume Feature.

3.  Press and release the 

MUTE button.

4.  Press and release the 

VOL    button. 

The red indicator light will blink twice 
and go off.

Code Identification
1.  Press and hold the 

SETUP button 

until the red indicator stays on 
(approximately 4 seconds) and then 
release the button.

2.  Press and release the desired device 

button (

TV, DVD, CBL/SAT, DVR/AUX) 

you would like the code for.

3.  Press and release 

ENTER button.

4.  Press and release the 

#1 button. 

Count the number of times the 
remote light flashes. This is the 
number corresponding to the first 
digit of the code. Repeat the process 
by pressing the 

#2, #3 and #4 

buttons for the remaining digits.

5.  Press and release 

ENTER button to 

exit this mode.

 

Reset to Factory Settings
1.  Press and hold the 

SETUP button 

until the red indicator stays on 
(approximately 4 seconds) and then 
release the button.

2.  Press and release the 

MUTE button.

3.  Press and release the number 

#0 

button. The red indicator light will 
flash twice.