GE 20622 Manuel D’Utilisation
13
Remote does not operate your device.
• Press the device button of the device you
want to control.
• Program the remote with a new code.
• Install new batteries. (You might have to
• Install new batteries. (You might have to
reprogram your remote after installing new
batteries.)
batteries.)
• Remote may not be compatible with your device.
Remote does not operate some features of
your device.
• Sometimes a particular code might operate some
features but not all. Try programing remote with a
new code.
new code.
• Remote may not be able to operate all features of
your device or button names might be different
than your device.
than your device.
Red Indicator blinks and stays on after you
program a product code.
• Remote did not accept the code.
• Try to program the code again or try a
• Try to program the code again or try a
different code.
Remote Code is not available for a combo device
(e.g. TV/VCR)
• See section for controlling combo devices.
• See section for controlling combo devices.
Remote buttons are not operating properly
• Check to ensure the remote is not in shift mode.
• Check to ensure the remote is not in shift mode.
Press and release the
SETUP/SHIFT button and
see if the remote buttons operate properly. If this
does not help, press and release the
does not help, press and release the
SHIFT/SETUP
button again to exit the shift mode.
For additional troubleshooting information please
visit www.jascoproducts.com
Troubleshooting