Invacare 1500 Manuel D’Utilisation
MAINTENANCE AND TROUBLESHOOTING
27
Care and Maintenance of Bath Lift
The lifts are designed to provide a maximum of safe, efficient and satisfactory service
with minimum care and maintenance.
with minimum care and maintenance.
All parts of the lifts are made of the best grades of steel, but metal‐to‐metal contact will
wear after considerable use.
wear after considerable use.
There is no adjustment or maintenance of either the casters or wheel locks, other than
cleaning, lubrication and checking axle and swivel bolts for tightness. Remove all debris,
etc. from the wheel and swivel bearings. If any parts are worn, replace these parts
immediately.
cleaning, lubrication and checking axle and swivel bolts for tightness. Remove all debris,
etc. from the wheel and swivel bearings. If any parts are worn, replace these parts
immediately.
If you question the safety of any part of the lift, contact ICCI immediately.
Detecting Wear and Damage
It is important to inspect all stressed parts. Replace any damaged or worn parts
immediately and ensure that the lift is not used until repairs are made.
immediately and ensure that the lift is not used until repairs are made.
Cleaning the Lift
WARNING
The arms and seat of the lift must be cleaned and disinfected after each use with a
1. A soft cloth, dampened with water and a small amount of mild detergent, wipe down
all parts of the lift that are submerged in water from the bath.
NOTE: The lift can be cleaned with non‐abrasive cleaners or disinfectants.
CAUTION
DO NOT use the dryer when laundering the stretcher cover, button cover and
safety straps. Line dry only. Otherwise damage may occur.
2. Remove the stretcher cover, button cover and safety straps and wash in warm soapy
water. Disinfect as necessary.