Invacare 9805 Manuel D’Utilisation

SECTION 4—ASSEMBLY

Portable Patient Lift and Sling

Part No 1024492

Base Shifter Handle Assembly

NOTE: For this procedure, refer to
FIGURE 4.3.

1. Insert the base shifter handle into the

cam lock assembly at the back of the
base.

2. Align the holes of the shifter handle

and cam lock assembly.

3. Tighten the thumbscrew to secure the

shifter handle in place.

NOTE: This should prevent the base shifter
handle from being removed.

FIGURE 4.3 Base Shifter Handle Assembly

Swivel Bar Attachment with Mounting Bracket

NOTE: For this procedure, refer to FIGURE 4.4.

1. Push the pin and washers up through the swivel bar pad.

2. Line-up hole in pin with mounting bracket holes and secure with shoulder screw and

nut provided.

NOTE: The swivel bar has hooks on both ends to accept the hardware used to attach the sling that
supports the patient during lift. The swivel bar pad should remain in place during normal use.

FIGURE 4.4 Swivel Bar Attachment with Mounting Bracket

Thumbscrew

Base Shifter Handle

Cam Lock

Assembly

Swivel Bar Pad

Nut

Shoulder

Screw

NOTE: Make sure Pin and Washers are completely
pushed up through the Swivel Bar Pad.