Panasonic AJ-HD1400P Manuel D’Utilisation

50

*1 Displayed menus may vary depending on the settings in

menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).

*DW: With SD output (SD tape playback or down-converted

output)

“_____” indicates the factory setting.

This sets the line on which the UMID information is to 
be superimposed.
0000

<Notes>
z The line selected for the menu item No. 501 VITC 

POS-1 and No. 502 VITC POS-2 settings cannot 
be selected for this item.

z The default settings are not restored even if the 

RESET button is pressed while holding down the 
SEARCH button.

z Metadata recorded on the tape will be output giving 

UMID information first priority. When metadata is 
output, set to a line other than the original 
multiplexed line or select “BLANK.”

This selects gamma correction.
0000

Gamma correction is not carried out.

This corrects video images shot with the cine 
gamma FilmREC mode of the Varicam to images 
of film quality (equivalent to Telecine 5 of HD 
Gamma Corrector in AJ-GBX27G).

This corrects video images shot with the cine 
gamma FilmREC mode of the Varicam to images 
of film quality (equivalent to Telecine 6 of HD 
Gamma Corrector in AJ-GBX27G).

This converts video images shot with the cine 
gamma FilmREC mode of the Varicam into the 
Cineon curve appropriate for film recording.

<Notes>
z Gamma correction is effective in the following conditions.

Š When the VTR operation mode is VV (TAPE) and 

720p is displayed in the system format.

However, during cross convert from 720p 

> 1080i, 

gamma correction is not effective for SD output.

z When “ON” is selected, the GAMMA lamp on the 

front panel is on at all times.

z When this unit is turned to OFF, this setting returns 

to "OFF." The setting of user default returns to “OFF.”

z This item is not effective for 1394 output.

256

256

512

512

768

768

1023

1023

TELECINE5

TELECINE6

Cineon

For selecting the blanking ON/OFF for a period of 
vertical blanking on video signals of the SD output.
0000

All the lines are forcibly blanked.

None of the lines are blanked.

Blanking ON or OFF is selected on a line-byline 
basis.

<Notes>
z When setting “MANU,” if the STOP button is 

pressed, the screen shifts to the sub screen and 
the ON/OFF setting for each line can be adjusted. 
Press the STOP button again to return to the main 
screen.

z Lines that are selected as being blanked in this 

menu item are similarly blanked before being up-
converted when replaying the SD tape.

Forced blanking

No blanking

Forced blanking

No blanking