VTech LS6425 Manuel D’Utilisation

5

Your telephone base is ready for tabletop use. If you want to mount your 

telephone on a wall, use the provided wall mount bracket to connect with a 

standard dual-stud telephone wall mounting plate. If you do not have this 

mounting plate, you can purchase one from many hardware or consumer 

electronics retailers. You may need a professional to install the mounting plate.

Plug one end of the telephone line cord into the

 TEL LINE jack on the bottom 

of the telephone base. Plug the small end of the power adapter into the 

POWER jack on the bottom of the telephone base.
Position the lower portion grooves on the telephone base to the lower portion 

tabs (marked 

A) on the wall mount bracket. Make sure the upper portion 

grooves of the telephone base are above the upper portion tabs on the wall 

mount bracket.
Route the telephone line cord through the wall mount bracket hole and plug 

it into the telephone wall jack. Route the power cord out of the bottom of the 

telephone and plug it into an electrical outlet not controlled by a wall switch.
Align the holes on the bracket with the standard wall plate and slide the 

bracket down until it locks securely. Bundle the telephone line cord and power 

adapter cord neatly with twist ties.

1.

2.

3.

4.

A

A

1

2

3

4