Sony Ericsson P908 Mode D'Emploi

•

Backup and restore

Set the P908 in 

 when using

•

P908 as a modem

•

Dial-up network wizard

You should disable the USB cable connection in these three 
cases. In your PC select 

 and disable the COM port to 

which the cable is connected.

When connecting via the infrared port, make sure that both 
devices are placed within one metre from each other and that the 
infrared ports have a free line of sight between them.

Both your P908 and the device you connect to must have their 
infrared ports activated before communication can begin.

1. Go to 

.

2. Set the P908 to 

 or 

 as required.

3. Set the port state to 

 or 

You can also change the infrared port state with the Flip closed, 
in the 

 application.

1. Right click 

 in the status area to the right on the taskbar.

2. Select 

3. Select the Infrared check box

4. Click 

.

Note Clear the Infrared check box when ready.

You can send items via the infrared port, beam, in any 
application if there is a 

 command. To send, select 

. If you receive a beamed item, a dialogue box appears 

with three options: 

, 

 or 

. 

deletes the item; 

 opens the associated application which shows the item; 

 saves it in the 

 folder in 

. 

You can connect your P908 to other products equipped with 
Bluetooth wireless technology, for example PCs or other mobile 
phones, and exchange data. Since Bluetooth wireless technology 
is radio-based, there does not have to be a free line of sight 
between transmitting and receiving devices. This means that