Sony Ericsson P908 Mode D'Emploi

your P908 can stay in your pocket while communicating. 
However, items between transmitting and receiving devices 
might weaken the signal.

Connection to another device can be made within a range of up 
to 10 metres. Obstructions between the transmitting devices will 
have an effect on the performance. For all tasks, except 
beaming, it is necessary that you first set up a permanent and 
trusted relationship between your P908 and the other device. 
This process is called pairing (other documentation may refer to 
it as bonding). The paired devices are remembered by your P908 
even after you have turned it off so you do not need to repeat the 
process for every connection with those devices. The reason for 
pairing is to simplify future connections and to make them 
secure – only paired devices can connect to your P908.

Activate Bluetooth wireless technology on your P908 in 

.

Set 

 to 

, 

and set if your P908 should be 

 or not. See 

‘Bluetooth’ on page 153 for more information on Bluetooth 
wireless technology settings.

The Bluetooth wireless technology operation mode can also be 
changed with the Flip closed, through the 

 

application. When the Bluetooth wireless technology is 
activated, 

 appears on the screen and the left indicator on top 

of your P908 flashes blue.

1. In 

, set 

 to 

2. Set the other device to be on or discoverable.

3. In the 

 tab, tap

. Your P908 searches for all devices 

in the vicinity and lists them.

– All enabled devices that are visible to others within range, 

are shown with their name and icon. You can use 

 to 

restrict the list to one category (only PC, for example). 

– Paired devices that are within range are shown with 

regular text.

– Non-paired devices that are within range are shown with 

their names in italics.

– Devices that are within range but unknown are shown 

with a preset name.

4. Select the device you want your P908 to pair with, and enter 

a passcode when asked for it. When the passcode is accepted, 
the pairing process is complete, see ‘Passcodes’ on page 138.

5. If in the future you want to allow a paired device to connect 

to your P908 without you explicitly approving each 
connection, you should select 

 then select a device and the check box 

.