Microsoft MP C3500 Manuel D’Utilisation
When the Machine Does Not Operate As wanted
18
1
*1
Simultaneous operations are only possible after the preceding job documents are all
scanned and [New Job] key appears.
*2
You can scan a document after the preceding job documents are all scanned.
*3
Operation is possible when extra lines are added.
*4
During stapling, printing automatically starts after the current job.
*5
Stapling is not available.
*6
Simultaneous operation become possible after you press [New Job] key.
*7
During parallel reception, any subsequent job is suspended until the receptions are
completed.
Note
❒ Stapling cannot be used at the same time for multiple functions.
❒ If the machine is capable of executing multiple functions simultaneously,
❒ If the machine is capable of executing multiple functions simultaneously,
specify which function should have priority in “Print Priority”. This setting is
factory-preset to “Display Mode”. For setting of Printing Priority Function,
see “Print Priority”, General Settings Guide.
factory-preset to “Display Mode”. For setting of Printing Priority Function,
see “Print Priority”, General Settings Guide.
❒ When Booklet Finisher SR3020, Finisher SR3030 or SR790 is installed on the
machine, you can specify the output tray where documents are delivered. See
“Output tray settings”, General Settings Guide.
“Output tray settings”, General Settings Guide.
❒ While printing is in progress, scanning a document using another function
may take more time.