KYOCERA 2001832 Manuel D’Utilisation

Charging the Internal Battery

Keeping track of your battery’s charge is important. If 
your battery level becomes too low, your device 
automatically turns off, and you will lose any 
information you were just working on. 
Always use a Sprint-approved or Kyocera-approved 
battery charger, desktop charger, travel charger, or 
vehicle power adapter to charge your battery.

1.

Plug the smaller end of the 
micro-USB cable into the device’s 
charger/accessory jack.

2.

Plug the other end of the USB 
cable into the wall/USB 
charger, and then plug the 
wall/USB charger into an electrical outlet.

䡲

A 

solid red indicator light

 means the battery is 

charging.

䡲

A 

flashing red indicator light

 means the battery is low.

䡲

A 

solid

 

green indicator light

 means the battery is 

fully charged.

䡲

A 

flashing green indicator light

 means you have 

new pending notifications.

With the Sprint-approved Li-Ion battery, you can 
recharge the battery before it becomes completely run 
down. With the use of the included battery charger, you 
can charge a spare battery without its having to be 
inserted in the device. See “Using the External Battery 
Charger” below.

Using the External Battery Charger

Your device comes with a spare battery and external 
battery charger. You can use your device with one 
battery while the other one charges, assuring you will 
have access to your device where you need it and 
when you need it.

To install a battery in the external charger:

1.

Holding the charger with the printed logo right side 
up, slide the cover to the right until it locks into 
open position.

2.

Insert the battery contacts end first, making sure 
they align with the charger’s contact points.

3.

Slide the cover to the left until you hear a click.

Do not remove the battery while it is charging. 
Always remove the charger from the electrical 
outlet first before removing the micro-USB cable 
from the device.