KYOCERA 2001832 Manuel D’Utilisation

To charge the battery in the external charger:

1.

Slide the switch on the charger to the 

DC IN 5V

 

position.

2.

Plug the smaller end of the micro-USB cable into 
the micro-USB jack on the charger.

3.

Plug the other end of the micro-USB cable into the 
wall/USB charger, and then plug the wall/USB 
charger into an electrical outlet.

䡲

The red lamp light is on while the battery is charging.

䡲

The red lamp light goes off when the battery is fully 
charged.

To use the battery charger as an external battery:

1.

Slide the switch on the charger to the 

DC OUT 5V

 

position. (The charge lamp turns green.)

2.

Plug the smaller end of the micro-USB cable into 
the device’s charger/accessory jack and the other 
end into the USB jack on the charger.

䡲

The green lamp on the charger remains on while 
charging the battery. (The green lamp will not go off 
until the external battery completely discharges.)

䡲

The LED indicator on the device will light red 
while charging and it will change to green when 
fully charged.

If the charge lamp starts flashing red, you may have a 
high battery temperature, battery problem, wall/USB 
charger problem, or battery charger problem.

Wall/USB charger

Charge lamp 
(red)

Slide switch

DC IN 5V

DC OUT 5V

Micro-USB jack 

Charger

If the green charge lamp does not light up, the installed 
battery is not sufficiently charged. Make sure your 
battery is fully charged prior to use.

Device

LED indicator

Charger/
Accessory jack

Charger

Charge lamp 
(green)

USB jack 

Slide switch

DC IN 5V

DC OUT 5V