Cisco Systems 78-10588-03 Manuel D’Utilisation
Chapter 3
Installing the Chassis
Cleaning the System
3-18
Cisco Metro 1500 Series Hardware Installation Guide
78-10588-03
Table 3-1 lists the power requirements in different countries.
Grounding the Chassis
Connecting the power cords to the chassis provides basic grounding. You should
also connect a separate grounding cable for each chassis to the rack. Use the
ground contact on the right side of the chassis to make the grounding connection.
also connect a separate grounding cable for each chassis to the rack. Use the
ground contact on the right side of the chassis to make the grounding connection.
To ground the chassis, follow these steps:
Step 1
Connect a wire to the earth contact on the right side of the chassis.
Step 2
Connect the other end of the wire to the rack.
Cleaning the System
This section describes how to clean the chassis and the connectors and includes
the following sections:
the following sections:
•
•
Table 3-1
Power Requirements
Region
Power Requirements
North America
110 to 120 VAC, 60 Hz or
-48 to -60 VDC
-48 to -60 VDC
Europe
210 to 240 VAC, 50 Hz or
-48 to -60 VDC
-48 to -60 VDC