Cisco Systems 78-10588-03 Manuel D’Utilisation
3-3
Cisco Metro 1500 Series Hardware Installation Guide
78-10588-03
Chapter 3
Installing the Chassis
Before Installing
Upon receipt, inspect the equipment as follows:
Step 1
Take inventory.
Compare the equipment inside with the packing slip and the equipment list
provided by customer service. If there are any discrepancies, notify the Customer
Service Center.
provided by customer service. If there are any discrepancies, notify the Customer
Service Center.
Step 2
Check for external damage.
Visually check all components and immediately report any shipping damage to
your customer service representative. Have the following information ready:
your customer service representative. Have the following information ready:
•
Invoice number of shipper (see packing slip)
•
Model and serial number of the damaged unit
•
Description of damage
•
Effect of damage on the installation
Maintaining a Network Record
Fill out all the required information in Appendix E, “Unit Maintenance and
Network Record,” so you will have a record of all of your hardware, configuration
options, and network settings.
Network Record,” so you will have a record of all of your hardware, configuration
options, and network settings.
Mounting the System
The unit is designed for rack-mounting in a cabinet. We recommend mounting up
to four units in one vertical rack and using chassis runners or telescopic slides.
Use star-type lock washers on the rack screws to ensure a good conductive
connection between the unit and the rack. For further information about installing
the units in a customer cabinet, see the instructions from the
cabinet manufacturer.
to four units in one vertical rack and using chassis runners or telescopic slides.
Use star-type lock washers on the rack screws to ensure a good conductive
connection between the unit and the rack. For further information about installing
the units in a customer cabinet, see the instructions from the
cabinet manufacturer.