Tascam DR-1 Manuel D’Utilisation

y

 

OUTPUT VOLUME (+, –) keys

Use these keys to adjust the signal level output 

from the 

/LINE OUT

 jack. The volume level 

appears on the display during adjustment. 

u

 

MIX BALANCE (–, +) keys

When the Input Setting Screen’s 

MONITOR

 item 

is set to 

ON

, use these keys to adjust the volume 

of the playback signal that is mixed with the 

input signal. The playback volume appears on the 

display during adjustment. Use the + key to raise 

the volume and the – key to lower the volume. 
When 

MONITOR

 is set to 

OFF

, “

MONITOR  

OFF

” appears on the screen and these keys have  

no effect. 

i

 

SETTING key

 

Press this key to open the Input Setting Screen 

where you can select the input, make 

INT/MIC1 

IN

 settings and turn 

MONITOR

 ON and OFF.

o

 

INPUT volume

 

Use this to adjust the input signal level of the  

built-in microphone, the 

MIC 1 IN

 jack and the 

MIC 

2 IN 

jack. This does not affect the input signal level 

of the 

LINE IN

 jack 

p

 

/LINE OUT jack 

Use this to connect with headphones or the 

line input jack of an amp or other equipment. 

Depending on the 

MONITOR

 setting and recorder 

operation status, this outputs the input signal, the 

playback signal or a mix of both signals.

a

 

DC IN 5V jack

 

Connect a TASCAM PS-P520 AC adapter 

(purchased separately) to this jack. 

s

 

SD card slot

 

Insert an SD card into this slot. (See “About SD 

cards” on page 4.) 

d

 

USB port

 

Use the included USB cable to connect with a 

computer USB port. (See “Connecting with a 

computer” on page 15.) 

CAUTION

f

 

POWER key

 

Press and hold this key to turn the unit’s power ON 

and OFF. 

g

 

HOLD switch

 

Slide this to the left to turn the hold function ON. 

All keys are inoperative when hold is ON.