Manualsbrain.com
  1. Manuels
  2. Marques
  3. JVC
  4. GYHM150U
  5. Manuel D’Utilisation

JVC GYHM150U Manuel D’Utilisation

Télécharger
Page de 104
90
Loading Clips to the PC (USB Mode)
You can load clips to a PC by connecting the camera 
recorder to the PC via the USB port. Doing so enables clips 
stored in the SDHC/SDXC card to be managed and edited 
on the PC.
Files on the SDHC/SDXC card can be managed/edited on 
the connected PC in this mode only for USB mass storage 
class devices that are recognized by the PC as a peripheral 
drive.
Memo :                                                                                 
● Files cannot be written to the SDHC/SDXC card.
● Make sure to manage/edit files recorded in the MP4 file 
format using the (JVC ProHD Clip Manager) PC application 
software in the bundled CD-ROM.
● For details on how to install the application software, refer 
                                                                                                    
inside the bundled CD-ROM.
1 
Connect the camera recorder to the PC using a USB 
cable.
A confirmation message 
AChange to USB ModeB to enable 
the USB connection appears.
2 
Select [Change] using the set lever (
JK
), and press 
the center of the set lever.
The camera recorder switches to USB mode.
Memo :                                                                                 
● If recording is in progress, the AChange to USB ModeB 
message appears after recording stops.
● If playback is in progress, the camera recorder switches to 
USB mode after the file closes automatically, such as when 
                                                                                                    
playback stops.
Disconnecting
Disable the connection on the PC, then remove the USB 
cable from the camera recorder.
Doing so exits the USB mode and switches the camera 
recorder to Camera mode.
Memo :                                                                                 
● The procedure for disabling the USB connection varies 
according to the PC in use. For details, refer to the 
                                                                                                    
instruction manual of the PC.
When your PC cannot recognize the SDXC 
card
Confirm and update the OS of your PC.
Managing/Editing Clips on 
a PC
DC
OPEN
REC
PUSH
OIS
SHUTTER
AE ±
ADJ
./ V
O
L.
CLOSE
ACCESS
PC
[USB] Terminal
Windows XP/
Windows XP SP1
Necessary to update to SP2 or higher.
Windows XP SP2/
Windows XP SP3
Necessary to download the update 
software.(KB955704)
http://www.microsoft.com/downloads/
details.aspx?familyid=1CBE3906-DDD1-
4CA2-B727-
C2DFF5E30F61&displaylang=en
Windows Vista
Necessary to update to SP1 or higher.
Windows Vista SP1/
Windows Vista
Necessary to download the update 
software.(KB975823)
● 32 bit version
http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=2d1abe01-0942-
4f8aabb2-2ad529de00a1
● 64 bit version
http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=7d54c53f-017c-
4ea5-ae08-34c3452ba315
Windows 7
Necessary to download the update 
software. (KB976422)
● 32 bit version
http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=3ee91fc2-a9bc-
4ee1-aca3-2a9aff5915ea
● 64 bit version
http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=73f766dd-7127-
4445-b860-47084587155f
2
GY-HM150U.book  Page 90  Monday, September 5, 2011  1:48 AM