JVC GYHM150U Manuel D’Utilisation

Applicable to: Camera mode

It is necessary to restore the SDHC/SDXC card if an 
abnormality occurs to the data in the card due to some 
reasons.
A 

A! RESTOREB message appears at the remaining media 

display area when an SDHC/SDXC card that requires 
restoring is inserted.

● The message ARestore MediaB appears on the LCD 

monitor/viewfinder screen when an SDHC/SDXC card 
that requires restoring is inserted while the thumbnail 
screen is displayed. To cancel the message display, press 

the center of the set lever.

Select [Restore Media] in the [Media] menu. (

● When restoring is complete, ACompleteB appears and the 

camera recorder returns to the [Restore Media] screen.

● When no media that requires restoring is inserted, the 

camera recorder returns to the [Media] menu screen.

● [Restore Media] can only be selected in Camera mode. 

However, it cannot be selected while the camera recorder is 
recording. Select [Restore Media] in Camera mode when the 
camera recorder is not recording.

● [Restore Media] does not restore the SDHC/SDXC card to 

its original states completely. If restoring fails, replace or 
format the SDHC/SDXC card. Take note that formatting the 
SDHC/SDXC card erases all information inside.

● Restoring cannot be performed in the following cases.

• SDHC/SDXC card is not inserted.
• Write-protect switch of the SDHC/SDXC card is set (

 

is displayed).

• Restoring is not required.

GY-HM150U.book  Page 92  Monday, September 5, 2011  1:48 AM