Nikon S1100pj Manuel D’Utilisation

Changing the Projecting Settings

U

sin

g th

e pro

je

cto

r

b Projector Slide Show

Project pictures stored in the internal memory or on the memory card as an 
automated slide show.

Check the camera position and focus with the 
standby screen.

Follow steps 3 and 4 under “Projecting Pictures” (

A 163) 

to adjust camera position and focus. 

Tap 

w (View selected images) on the monitor to select 

and play back the pictures as a slide show in projector 
mode (

Tap 

x (Effects), y (Frame intvl), z (Background music), or X (volume) to change 

each setting (

To repeat slide show automatically, tap 

m (loop playback).

Press the b button on the remote control.

When the b button on the remote control is pressed without 
displaying the standby screen in step 1, the slide show begins with the 
previously made settings.

The operations described in step 3 to 4 can also be performed with the 
operation controls on the camera’s monitor or the 

g and f zoom 

controls.

The slide show begins.

While the slide show is in progress, press the 

K button on 

the remote control to display the next picture or the 

J 

button to display the previous picture. Hold down the 
buttons to advance or rewind the slide show.

Press the apply selection button to pause the slide show, 
or press the b button to end it.

During a slide show with Background music, the volume can be adjusted with the 
g (+) or f (–) button.

End or resume the slide show.

When the slide show ends or is paused, press the b button to return to the screen 
shown in step 1. Press the apply selection button to resume the slide show.

P button (projector mode) M Tap the bottom tab M b Slide show

Slide show

4

4