Nikon S1100pj Manuel D’Utilisation

Tec

h

nica

l N

otes and 

Ind
e

x

The following table lists the error messages and other warnings displayed in the 
monitor, as well as the solutions for dealing with them.

Display

Problem

Solution

A

O (blinks)

Clock not set.

Set date and time.

B

Battery running low.

Prepare to charge or 
replace battery.

N
Battery exhausted.

Battery exhausted.

Charge or change battery.

P
Battery temperature 
high

Battery temperature is 
high.

Turn off camera, and allow 
battery to cool down 
before resuming use. After 
five seconds, this message 
will disappear, the monitor 
will turn off, and the 
power-on lamp will blink 
rapidly. After the lamps 
blink for three minutes, the 
camera will turn off 
automatically. Pressing the 
power switch also turns off 
the camera.

P
The camera will turn 
off to prevent 
overheating.

The camera has become 
hot due to the heat of the 
projector.

The camera turns off 
automatically. Leave the 
camera off until it has 
cooled and then turn it on 
again.

Q (

● blinks red)

Camera cannot focus.

• Refocus.
• Focus on another 

subject positioned at the 
same distance from the 
camera as the intended 
subject.

30, 31
46

P
Please wait for the 
camera to finish 
recording.

Camera cannot perform 
other operations until 
recording is complete.

Wait until message clears 
from display automatically 
when recording is 
complete.

–

u
Memory card is write 
protected.

Write-protect switch is in 
“lock” position.

Slide write-protect switch 
to “write” position.