Nikon S1100pj Manuel D’Utilisation

Bas

ic Ph

otography an

d Pl

ayba

ck

: G
 (Easy Auto) Mode

Use the remote control ML-L5 (supplied; 

A 6) to take pictures. It is convenient for 

taking self-portraits and effectively eliminates blur caused by camera shake that 
occurs when the shutter-release button is pressed. 
• The remote control can also be used in conjunction with the self-timer.
• Use of a tripod is recommended during shooting with the remote control. Set 

Vibration reduction (

A 150) to Off in the setup menu (A 142) when using 

a tripod to stabilize the camera during shooting.

Use a tripod or other means of stabilizing the camera.

Frame a picture.

To use the self-timer, follow steps 1 and 2 under “

n Taking Pictures with the Self-timer” 

A 37) to make self-timer settings.

Press the 

g or f button to activate the zoom. Press the g button to 

zoom in so that the subject fills a larger area of the frame, or the 

f 

button to zoom out, thus increasing the area visible in the frame.

When Smile timer is set to On in smart portrait mode (

camera detects human faces, remote control operation is not available.

Point the infrared emitter of the remote 
control at the infrared receiver on the 
front or rear of the camera (

press the apply selection button.

The shutter is released and a picture is saved.

Point the remote control at the infrared receiver 
from a distance not greater than 5 m (16 ft.).

When the self-timer is used, focus is locked, 
exposure is adjusted, and the self-timer begins 
counting down. Once the shutter is released, the 
self-timer is automatically disabled. To stop the 
self-timer before a picture is taken, press the apply 
selection button again.

Rear

Front

Apply selection

button