Nikon S3100 Manuel D’Utilisation

Page de 196
162
T
e
ch
n
ical
 No
te
s an
d I
n
de
x
Error Messages
The following table lists the error messages and other warnings displayed in the 
monitor, as well as the solutions for dealing with them.
Display
Description
Solution
A
O (blinks)
Clock not set.
Set date and time.
N
Battery exhausted.
Battery exhausted.
Charge or replace the battery.
P
Battery temperature 
high
Battery temperature is 
high.
Turn off camera, and allow 
battery to cool down before 
resuming use. After five 
seconds, the monitor will turn 
off and the power-on lamp 
and flash lamp will blink 
rapidly. After the lamps blink 
for three minutes, the camera 
will turn off automatically. 
Pressing the power switch 
also turns off the camera.
Q (
● blinks red)
Camera cannot focus.
• Refocus.
• Use focus lock.
P
Please wait for the 
camera to finish 
recording.
Camera cannot perform 
other operations until 
recording is complete.
Wait until message clears 
from display automatically 
when recording is complete.
u
Memory card is write 
protected.
Write-protect switch is 
in “lock” position.
Slide write-protect switch to 
“write” position.
P
This card cannot be 
used.
Error accessing memory 
card.
• Use approved card.
• Check that connectors are 
clean.
• Confirm that memory card 
is correctly inserted.
P
This card cannot be 
read.
P
Card is not formatted. 
Format card?
Yes
No
Memory card has not 
been formatted for use 
in this camera.
Formatting deletes all data 
stored on the memory card. 
Be sure to select 
No and make 
copies of any pictures you 
wish to keep before 
formatting the memory card. 
Select 
Yes and press the k 
button to format the memory 
card.