Nikon S3100 Manuel D’Utilisation

Page de 196
166
T
e
ch
n
ical
 No
te
s an
d I
n
de
x
Troubleshooting
If the camera fails to function as expected, check the list of common problems 
below before consulting your retailer or Nikon-authorized service representative.
Display, Settings and Power Supply
Problem
Cause/Solution
A
Battery inserted into the 
camera cannot be charged.
• Confirm all connections.
• Off is selected for Charge by computer in 
the setup menu.
• When charging by connecting the camera to 
a computer, battery charging stops when the 
camera is turned off.
• When charging by connecting the camera to 
a computer, battery charging stops when the 
computer is suspended (sleeping), and the 
camera may turn off.
• Depending upon computer specifications, 
settings, and status, it may be impossible to 
charge the battery inserted into the camera 
via computer connection.
Camera cannot be turned on
• Battery is exhausted.
• When connecting to an electrical outlet using 
a Charging AC Adapter, the camera cannot be 
turned on.
Camera turns off without 
warning.
• Battery is exhausted.
• Camera has turned off automatically to save 
power.
• The camera and battery may not work 
properly at low temperatures.
• The camera turns off if the Charging AC 
Adapter is connected while the camera is on.
• The USB cable connecting the camera to the 
computer or printer has been disconnected. 
Reconnect the USB cable.
Monitor is blank.
• Camera is off.
• Standby mode for saving power: Press the 
power switch, shutter-release button, A 
button, 
c button, or b (e movie-record) 
button.
• When flash lamp blinks red, wait until flash 
has charged.
• Camera and computer are connected via USB 
cable.
• Camera and TV are connected via audio/video 
cable.