Nikon S3100 Manuel D’Utilisation

Charging the Battery

First Ste

p

s

To turn on the camera, press the power switch. 

The power-on lamp (green) will light, and then the 
monitor will turn on (the power-on lamp turns off 
when the monitor turns on).

To turn off the camera, press the power switch again.

When the camera is turned off, both the power-on lamp and monitor will turn off.
• If the camera is turned off, hold down the c button to turn the camera on in 

playback mode (

C

If no operations are performed for a while, the monitor will turn off, the camera will enter standby 
mode, and the power-on lamp will blink. If no operations are performed for another three minutes, 
the camera will turn off automatically. 

• To reactivate the monitor while the power on lamp is blinking, press any of the following buttons:

- Power switch, shutter-release button, A button, 

c button or b (e movie-record) button.

• In shooting or playback mode, the camera will enter standby mode in about one minute (default 

setting).

• The time allowed to elapse before the camera enters standby mode can be changed from the 

Auto off option (A 147) in the setup menu (A 135).