Veo Observer Manuel D’Utilisation

Page 26 of 65 

 
Click the  Group button to set up a camera group to easily log in. Once you define a group of up to four 
cameras, you can log in to the whole group with one click. 

 

1.  Select up to four cameras from the list on the left. 
2.  Click Select to add the cameras to the group. 
3.  Enter a Group Name in the text box at the top. 
4.  To remove a camera from the group, select it from the 

list on the right and click Delete. 

5.  Click OK to save the group and exit or Cancel to exit 

without saving. 

 
 
 
 
 
 
 
 

 
Modify   

Used to change the settings of a camera already added to the list. 

Delete   

Removes a camera from the Camera Manager list. 

Save changes and exit. 

Close Camera Manager without saving changes. 

 

                                       

   

 
The connection status dialog box appears as shown below. 

 
 
As soon as the login process is complete the camera will begin to stream live video and all the camera controls 
become active. Depending on the speed of your connection to the camera and the image streaming size, you 
may experience varying amounts of delay before the image appears. 

 

 
Note: You can only log in to a group of cameras while in the multi-camera window. See the Multi-
Camera Viewing section for more information. 
 

 

 
Note: If the status shows “No Response from 
Camera,” the camera is either offline or you may 
have entered an incorrect URL or port number.   
Please check that the camera’s IP address or 
domain name and port number match the 
information you entered. Refer to the 
Troubleshooting section in Appendix G for 
help diagnosing connection problems. 
 

Step 1. Click 
the down arrow 
to display the 
camera list. 

Step 2. Click on a 
camera from the list to 
log in to it and begin 
viewing.