Veo Observer Manuel D’Utilisation

Page 27 of 65 

 
Pan and Tilt Controls: Click on any of the arrow buttons to move the camera one small step in the direction 
indicated by the arrow. Holding down a button for a few seconds will move the camera one large step. 
 

 
 
 
 
 
 
 
 
 

 
Digital Zoom Control 
 

2X 

Click to zoom in on the image center 

1X 

Click to return to normal viewing 

 
 

 

  
 

 
. 
 
 

 

 
Image Display Size Controls 

 
The image display size buttons change the size of the image on your display by scaling the camera 
image. 
 
 
 
 
 
 
 

 

 
Note: The pan & tilt reaction time will depend on the speed of your connection. Slower connections, 
especially long distance Internet connections, may introduce delays of up to a few seconds.   
 

 

 
Note: The frame rate displayed will vary and may not match the camera’s frame rate setting. Actual 
frame  rate is dependent on bandwidth and network traffic. The rate displayed is averaged over 
several seconds and is updated every few seconds. 
 

 

 
Note: The image size buttons do NOT affect the resolution (size) of the 
image captured by the camera. The image resolution can be changed in 
the camera’s setup web page. Because image resolution has a profound 
effect on bandwidth consumption and image quality, access is restricted 
to camera administrators. 
 

When the camera reaches its limit 
of travel range in any direction, the 
buttons for that direction will be 
disabled and their appearance will 
change as shown here. 

The camera’s location setting and average frame 
rate are displayed beneath the image for your 
reference only. The location setting can be 
changed from the camera’s setup web page. 

Drag the slider to the right to increase the image 
brightness or to the left to decrease it. Allow 
several seconds for the image to update to the 
new setting.