Canon ELPH135RED Manuel D’Utilisation

93

X

X

When the smartphone has been added 

successfully, the image transfer screen 

will be displayed. Proceed to “Sending 

Images” (

When you are in the vicinity of an access point that you have 

previously connected to, the camera will automatically connect to 

it in step 3. To change access points, select [Switch Network] from 

the screen that will be displayed when the connection is being 

established, and follow steps 4 – 5 in “Adding a Computer” (

All camera images can be viewed from the connected smartphone 

when you choose [Yes] in step 7. To keep camera images private, so 

that they cannot be viewed from the smartphone, choose [No] in step 7.

You can connect to smartphones that you have already connected to by 

choosing them on the [Select a Device] screen in step 3. 

After you have accessed the Wi-Fi menu once, you can access it again by 

pressing the <

o> button. The recent target device is listed first, so you can 

easily connect again by pressing the <

o><p> buttons to choose it. To add 

a new device, display the device selection screen by pressing the <

q><r> 

buttons, and then configure the setting.
If you prefer not to display recent target devices, press the <

n> button, 

and on the [

3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].

The image quality level for movies that can be sent may differ depending 

on the smartphone. Refer to the instruction manual provided with your 

smartphone for details.

To add multiple smartphones, repeat the above procedures starting from step 1.

To change privacy settings for smartphones added to the list, choose the 

smartphone whose settings you want to change from [Edit a Device] in step 3, 

and then choose [View Settings].

Connect two cameras via Wi-Fi and send images between them as follows.

Only Canon-brand cameras equipped with a Wi-Fi function can be connected to 

wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be connected 

to if they do not have a Wi-Fi function. You cannot connect to PowerShot SD430 

DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS cameras with this camera.

z

z

Press the <

o> button.

z

z

Press the <

o><p><q><r> buttons to 

choose [

4], and then press the <m> 

button.

z

z

Press the <

o><p> buttons to choose 

[Add a Device], and then press the <

m> 

button.

z

z

Follow steps 1 – 3 on the target camera.

X

X

Camera connection information will be added 

when [Start connection on target camera] is 

displayed on both camera screens.

X

X

When the target camera has been added 

successfully, the image transfer screen 

will be displayed. Proceed to “Sending 

COP

Y