Canon ELPH135RED Manuel D’Utilisation

95

To use Wi-Fi, a Wi-Fi base unit (Wi-Fi router, etc.) that acts as your access 

point must be connected to a computer. Be sure to use a Wi-Fi base unit 

If you are already using Wi-Fi, confirm the following items and mark each 

one on the Check sheet. For instructions on checking network settings, 

refer to the access point user guide.

If system administrator status is needed to adjust network settings, 

contact the system administrator for details.

These settings are very important for network security. Exercise 

adequate caution when changing these settings.

Check sheet

The SSID or ESSID for the access point you use.

The method for encrypting data during transmission via 

Wi-Fi.

○ None

○ WEP (open system 

authentication)

○ WPA-PSK (TKIP)

○ WPA-PSK (AES)

○ WPA2-PSK (TKIP)

○ WPA2-PSK (AES)

The data encryption key used for transmission via Wi-Fi.
Key index (sent key)

The key specified when using WEP for Network certificate/

data encryption.

○ 1

A router is a device that creates a network (LAN) structure for connecting 

multiple computers. A router that contains an internal Wi-Fi function is called a 

“Wi-Fi router”.

This guide refers to all Wi-Fi routers and base stations as “access points”.

If you use MAC address filtering on your Wi-Fi network, be sure to add the 

camera’s MAC address to your access point. You can check your camera’s 

MAC address by choosing the [

3] tab, [Wi-Fi Settings], and then [Check MAC 

Address].

On a computer running Windows, you must configure the following settings 

before you can connect the camera to the computer wirelessly.

z

z

For instructions on checking your network 

connection, refer to the computer user 

manual.

z

z

Click in the following order: [Start] menu 

► [All Programs] ► [Canon Utilities] ► 

[CameraWindow] ► [Wi-Fi connection 

setup].

z

z

In the application that opens, follow the 

on-screen instructions and configure the 

setting.

COP

Y