Hitachi JU-1000 Manuel D’Utilisation
- 30 -
5 CCU Status
CON --------------- Status of the CCU communication (blue flashing)
ERR --------------- CCU abnormal connection (red flashing or steady)
RX ----------------- CCU is being received (blue flashing).
TX ----------------- CCU is being transmitted (blue flashing).
6 RU Call
Call is being received from the RU (red flashing or steady).
Call of RU responds when C on the RU side of the Control screen is pushed (red steady +
Call sound).
7 CCU Call
Call of CCU or the camera is received (red flashing or steady).
Call of CCU and the camera responds when C on the CCU side of the Control screen is
pushed. (red steady + Call sound).
8 RU Progress Bar
The quantity of the data transmission buffer from PC to RU is displayed (blue gauge linear
display).
(A high PC CPU load causes data rate increase. There is a possibility that interference may
occur when the buffer and data transmission indicated becomes more than the half on the
blue linear display.)
display).
(A high PC CPU load causes data rate increase. There is a possibility that interference may
occur when the buffer and data transmission indicated becomes more than the half on the
blue linear display.)
9 CCU Progress Bar
The quantity of the data transmission buffer from PC to CCU is displayed (blue gauge linear
display).
(A high PC CPU load causes data rate increase. There is a possibility that interference may
occur when the buffer and data transmission indicated becomes more than the half on the
blue linear display.)
display).
(A high PC CPU load causes data rate increase. There is a possibility that interference may
occur when the buffer and data transmission indicated becomes more than the half on the
blue linear display.)
10 Camera Name Change
Only in the OFFLINE MODE; the camera can be selected from the pull-down menu and the
combination of RU and the CCU camera be changed.
(It is not possible to change in the OnLine operation state.)
combination of RU and the CCU camera be changed.
(It is not possible to change in the OnLine operation state.)