Panasonic AG-HPX250EN Manuel D’Utilisation
112
Using a hard disk drive (PC mode: USB host) (continued)
Using the USB HOST mode
Usable hard disk drives
• Hard disk drives connectable via USB 2.0
• The units compatible with the storage unit that
• The units compatible with the storage unit that
has Panasonic USB I/F
Refer to the support site at the following Website
for the compatible units.
Refer to the support site at the following Website
for the compatible units.
http://pro-av.panasonic.net/
• While the USB HOST mode supports USB
bus power (5 V, 0.5 A), some hard disk
drives may not activate. If this is the case,
power must be supplied in a different way.
• Do not connect more than one drive even
through a hub or any other device. Even
with devices other than a hard disk drive,
do not connect to the drive together with
the hard disk drive through a hub.
• The unit does not support a hard disk drive
of 2 TB (2048 GB) or more.
• To prevent copying or formatting problems
from occurring during connection to a
hard disk drive, be sure that the camera’s
battery is sufficiently charged or use the
AC adaptor.
• Versions 2.** and later of the P2 STORE
(AJ-PCS060G) support USB host mode for
this unit.
Versions 1.** cannot connect. Please
upgrade.
Viewing hard disk drive information
You can view the information on the hard disk drive
connected via USB with the following steps.
connected via USB with the following steps.
1
Switch the mode to USB HOST.
• “Switching to the USB HOST mode” (Page 111)
• The thumbnail screen is displayed.
• The thumbnail screen is displayed.
(USB HOST is displayed in the bottom right.)
2
Connect the hard disk drive to the camera-
recorder via USB 2.0.
3
Press the MENU button and select HDD →
EXPLORE from the thumbnail menu.
The screen provides the information about the
hard disk drive.
hard disk drive.
For Type S or P2 STORE
Press the EXIT button. ↑↓ Press the SET button.
For the FAT
Press the EXIT button. ↑↓ Press the SET button.