Sony BRC-H700 Manuel D’Utilisation

59

Installing the Camera in a High Position

14

Using the supplied ceiling brackets, wire rope and 
screws, and the attachment materials (not supplied), 
you can attach the camera to a ceiling or on a 
shelf, etc. in a high position. When you install the 
camera, always install it on a level ceiling or shelf, 
etc. If you have to install it on an incline, make sure 
that the inclination is within ± 15 degrees, so that 
the pan/tilt performance is guaranteed.

• When you attach the camera to a ceiling or shelf, 

etc. in a high position, entrust the installation to 

an experienced contractor or installer.  

• Attach the camera to the ceiling or shelf, etc. 

firmly, after making sure the ceiling, shelf, etc. and 

the attachment materials (not including the 

supplied accessories) are strong enough to bear 

a weight of 60 kg (132 lb 4 oz). If the ceiling or 

shelf, etc. is not strong enough, the camera may 

fall and cause serious injury.

• Be sure to attach the supplied wire rope to 

prevent the camera from falling.

• Check periodically, at least once a year, to 

ensure that the connection has not loosened. If 

conditions warrant, make this periodic check 

more frequently.

After deciding the shooting direction, make the 
required holes for the ceiling bracket (B) and 
connecting cables on the ceiling or shelf, etc. For 
the dimensions of the ceiling bracket (B), see 
page 42.

• The connecting cables cannot be passed through 

the ceiling bracket (A). A hole for the wiring is 

required in the ceiling or on a shelf, etc. behind 

where the camera is to be installed. 

• Do not attach any object other than the camera to 

the ceiling brackets.

• The ceiling bracket cannot be attached to the 

junction box when installing the camera on a 

ceiling.

 Set IMG-FLIP to ON in the SYSTEM menu.

 Remove the four screws on the bottom of the 

camera to remove the four feet.

 Attach the ceiling bracket (A) to the bottom of 

the camera using the supplied four screws (3M3 
× 8). Position the a hole for screwing on the 
ceiling bracket (A) to the front of the camera as 
illustrated, align the screw holes on the ceiling 
bracket with those on the bottom of the camera, 
then attach the bracket to the camera.

For attaching the camera to the ceiling bracket, use 

only the supplied screws. Using other screws may 

damage the camera.

Ceiling 

bracket (A) 

M3 x 8 (supplied) 

Front of 

camera