Sony BRC-H700 Manuel D’Utilisation

60

Installing the Camera in a High Position

 Attach the attachment materials (not supplied) 

to the ceiling bracket (B), and install the bracket 
on the ceiling. Align the hole on the ceiling 
bracket (B) in the direction where the front of the 
camera will be positioned later.

 Attach the wire rope to the materials near the 

ceiling. Use an M5 (3/16 inch) hexagon socket 
head cap screw (not supplied). Attach the wire 
rope to an area independent of the area where 
the ceiling bracket is attached.

 Attach the wire rope to the ceiling bracket (A). 

Pass the wire rope through the fixing hole and 
attach its end to the attachment hole on the 
bracket using the supplied one screw (3M4 × 8).

For attaching the wire rope to the bracket, use only 

the supplied screw. Using another screw may 

disable the function of the wire rope.

 Insert the protrusions on the ceiling bracket (A) 

into the spaces prepared in the ceiling bracket 
(B) with the hole in the front of the ceiling 
bracket (A) aligned with the hole on the ceiling 
bracket (B), and temporarily attach them by 
turning the ceiling bracket (A) with the camera 
clockwise.

 Secure the ceiling brackets (A) and (B) using 

the supplied three screws (3M3 × 8).

hole 

Ceiling 

Ceiling bracket (B) 

Attachment materials 

Ceiling 

Ceiling bracket (B) 

Attachment materials 

Wire rope (supplied) 

M5 (3/16 inch) 

hexagon socket head 

cap screw 

Ceiling bracket (A) 

Fixing hole for wire rope 

Wire rope (supplied) 

M4 x 8 (supplied) 

Ceiling 

bracket (A) 

Ceiling bracket (B) 

Ceiling 

Align. 

Ceiling 

M3 x 8 

(supplied)